31
Readying the Camera
6
Remove the battery and unplug the charger when
charging is complete.
D
Calibration
For information on calibrating batteries to ensure the accuracy of the
battery level displays, see “Calibrating Batteries” (
0
1114).
D
Warning Indicators
If the MH-26a chamber and charge lamps flash on and off in sequence,
take the steps described below.
•
If no battery inserted: There is a problem with the charger. Unplug the
charger and consult a Nikon-authorized service representative.
•
If a battery is inserted: A problem has occurred with the battery or
charger during charging. Remove the battery, unplug the charger, and
consult a Nikon-authorized service representative.
To Next Page
Loading...
