350
Creating a Movie from Photos (Time-Lapse Movie)
Recording Time-Lapse Movies
D
Before Shooting
•
Time-lapse movies are shot using the movie crop. Check the
composition before shooting.
•
Take test shots and check the results in the monitor.
•
Before proceeding, select [Time zone and date] in the setup menu and
make sure that the camera clock is set to the correct time and date.
•
We recommend using a tripod and disabling lens vibration reduction
(VR).
•
To ensure that shooting is not interrupted, use a fully-charged battery
or an AC adapter and power connector (available separately).
•
To prevent light entering via the viewfinder interfering with
photographs or exposure when your eye is from the viewfinder and
[Off] is selected for [Silent photography], raise the viewfinder eyepiece
shutter lever to close the viewfinder eyepiece shutter.
1
Highlight [Time-lapse movie]
in the photo shooting menu
and press
2
.
To Next Page
Loading...
