349
Creating a Movie from Photos (Time-Lapse Movie)
[Silent
photography]
Select [On] to silence the shutter and eliminate the
vibrations it produces during shooting.
[Image area]
•
[Choose image area]: Choose the image area for
time-lapse movies from [FX] and [DX].
•
[Auto DX crop]: If [On] is selected, the camera will
automatically choose the [DX] crop when a DX lens
is attached.
[Frame size/
frame rate]
Choose the frame size and rate for the final movie.
[Interval
priority]
•
[On]: Enable interval priority to ensure that frames
shot in modes P and A are taken at the chosen
interval.
-If AF-S is selected for autofocus mode, select
[Release] for Custom Setting a2 [AF-S priority
selection]. If AF-C is selected, select [Release] for
Custom Setting a1 [AF-C priority selection].
-If [On] is selected for [ISO sensitivity settings]>
[Auto ISO sensitivity control] and the time
chosen for [Minimum shutter speed] is longer
than the interval, the time selected for the interval
will take priority over the selected shutter speed.
•
[Off]: Disable interval priority to ensure that photos
are correctly exposed.
[Focus before
each shot]
If [On] is selected, the camera will focus between
shots.
[Destination]
Choose the slot used to record time-lapse movies
when two memory cards are inserted.
Option Description
To Next Page
Loading...
