330
Combining Multiple Exposures in a Single Photo (Multiple Exposure)
Ending Multiple Exposures
To end a multiple exposure before the
specified number of exposures have
been taken, select [Off] for multiple
exposure mode. A multiple exposure
will be created from the exposures that
have been recorded to that point (if
[Average] is selected for [Overlay mode], gain will be adjusted
to reflect the number of exposures actually recorded).
The multiple exposure will also end if:
•
a two-button reset is performed,
•
the camera is turned off,
•
the battery is exhausted, or
•
you press the
K
button followed by the
i
button and select
either [Save and exit] or [Discard and exit]
To Next Page
Loading...
