Nikon D6 - Page 1121

1069
Other Compatible Accessories
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power
connector and AC adapter.
1
Remove the BL-6 battery-
chamber cover.
Lift the battery-chamber cover latch,
turn it to the open (
A
) position (
q
),
and remove the BL-6 battery-
chamber cover (
w
).
2
Connect the EH-6c AC adapter to the EP-6 power
connector.
•
Pass the DC cable over the power
connector cable guide (
q
) and slide
it down until it is at the bottom of
the slot.
•
Insert the DC plug into the DC IN
connector (
w
).