Nikon D6 - Page 281

229
Achieving Natural Colors with Different Light Sources (White Balance)
A
The Information Display
During viewfinder photography, you can press
the
U
button to adjust white balance settings
in the information display.
•
Rotate the main command dial to choose the
white balance mode. When [Auto] or
[Fluorescent] is selected, you can choose an
[Auto] or [Fluorescent] sub-option by
rotating the sub-command dial.
•
When [Choose color temperature] is selected, you can rotate the sub-
command dial to choose the color temperature.
•
When [Preset manual] is selected, you can rotate the sub-command
dial to choose a white balance preset.
•
In modes other than [Choose color temperature] and [Preset
manual], you can use the multi-selector to fine-tune white balance on
the A (amber)– B (blue) and G (green)–M (magenta) axes.
A
Adjusting White Balance in Live View
White balance settings can be displayed by
pressing the
U
button during live view.
•
The procedures for choosing a white balance
mode and fine-tuning white balance are the
same as in the information display.
•
The effects can be previewed in the monitor.