238
Achieving Natural Colors with Different Light Sources (White Balance)
5
Check the results.
•
If the camera was able to measure a value for white
balance,
C
will flash in the top and rear control panels,
while the viewfinder will show a flashing
a
. Press the
shutter-release button halfway to exit to shooting mode.
•
If lighting is too dark or too bright, the camera may be
unable to measure white balance. A flashing
b
a
will
appear in the viewfinder and in the top and rear control
panels. Press the shutter-release button halfway to return
to Step 4 and measure white balance again.
To Next Page
Loading...
