298
Points to Note When Recording Movies
A
Movie Recording: Exposure Mode
•
If the subject is over- or under-exposed in mode P or S, exit and restart
live view or select mode A and adjust aperture.
•
The following exposure settings can be adjusted during filming:
1 Exposure control in mode S is the same as in mode P.
2If [On] is selected for [Electronic VR] in the movie shooting menu
when ISO sensitivity is set to a value of from Hi 0.3 to Hi 5, ISO
sensitivity will be limited to 102400.
3 The upper limit for ISO sensitivity can be selected using the [ISO
sensitivity settings]> [Maximum sensitivity] item in the movie
shooting menu.
4If [On] is selected for [ISO sensitivity settings]> [Auto ISO control
(mode M)] in the movie shooting menu, the upper limit for ISO
sensitivity can be selected using [Maximum sensitivity].
A
Adjusting White Balance During Movie Recording
White balance can be adjusted during movie recording by holding the
U
button and rotating the main command dial. If [Auto] or
[Fluorescent] is selected, a sub-option can be selected by rotating the
sub-command dial.
Mode Aperture Shutter speed ISO sensitivity
2
P, S
1
—— —
3
A
4
——
3
M
44 4
4
To Next Page
Loading...
