386
Location Data
❚❚
The Satellite Signal Indicator
Signal strength is shown by a
o
icon in
the top control panel.
•
o
(static): The camera records the
current latitude, longitude, and
altitude.
•
o
(flashing): The camera is unable to determine its location
from the satellite signal; location data are not recorded. Wait
for the
o
icon to stop flashing.
•
o
not displayed: The
o
icon clears from the display if no
signal is received for two seconds. Location data will not be
recorded with pictures taken when the icon is not displayed.
Note, however, that location data previously acquired may be
recorded with pictures taken after the icon has cleared from
the display.
To Next Page
