513
Troubleshooting Built-in Wi-Fi
The connection is
unreliable.
If [Auto] is selected for [Channel] when you
are connecting to a smart device, choose
[Manual] and select the channel manually
(
0
931).
If the camera is connected to a computer in
infrastructure mode, check that the router is
set to a channel between 1 and 8 (
0
933).
[Connect to smart
device] and [Connect to
PC (built-in Wi-Fi)] are
grayed out and cannot
be selected.
These options are not available when the
camera is connected via Ethernet or using a
WT-6. Select [Disable] for [Wired LAN/WT]>
[Wired LAN/WT functions] in the setup
menu (
0
937).
Problem Solution
To Next Page
Loading...
