653
Flash Compensation
Flash compensation is used to deliberately alter flash output, for
example in order to change the brightness of the subject
relative to the background. Flash output can be increased to
make the main subject appear brighter, reduced to prevent
glare, or otherwise fine-tuned to produce the desired result.
Adjusting Flash Compensation
Hold the
W
(
M
) button and rotate the sub-command dial.
•
Choose from values of from −3 to +1.
•
At default settings, changes to flash output are made in
increments of
1
/
3
EV. The size of the increment can be selected
using Custom Setting b3 [Exp./flash comp. step value].
Flash Compensation
To Next Page
Loading...
