34
Readying the Camera
❚❚
Removing the Battery
Before removing the battery, turn the
camera off, lift the battery-chamber
cover latch, and turn it to the open (
A
)
position.
D
Removing the Battery-Chamber Cover
To unlatch the battery-chamber cover so that it can be removed from the
battery, slide the battery release in the direction indicated by the arrow
(
H
) until it stops.
D
The Battery-Chamber Cover
•
Use BL-6 battery-chamber covers only; other battery-chamber covers
cannot be used with this camera.
•
The battery can be charged with the cover attached.
•
To prevent dust accumulating inside the battery chamber, replace the
battery-chamber cover on the camera when the battery is not inserted.
To Next Page
Loading...
