910
B
The Setup Menu: Camera Setup
Pixel mapping checks and optimizes the camera image sensor.
If you notice unexpected bright spots appearing in pictures
taken with the camera, perform pixel mapping as described
below.
•
Use a fully-charged battery to prevent unexpected loss of
power.
•
Attach the lens cap (front cap) and close the eyepiece shutter
before performing pixel mapping.
1
Select [Pixel mapping] in the setup menu.
Turn the camera on, press the
G
button, and select [Pixel
mapping] in the setup menu.
2
Select [Start].
Pixel mapping will start. “
1
” appears in the top control
panel while the operation is in progress.
3
Turn the camera off when pixel mapping is
complete.
Pixel Mapping
G
button
U
B
setup menu
To Next Page
Loading...
