925
B
The Setup Menu: Camera Setup
Adjust settings for connection to HDMI devices (
0
453).
Adjust settings for use with the camera’s built-in GNSS receiver.
For more information, see “Location Data” (
0
384).
Adjust status LED and link mode settings for optional WR-R10
wireless remote controllers. You can also choose a link mode for
connection to optional radio-controlled flash units that support
Advanced Wireless Lighting.
D
The WR-R10 Wireless Remote Controller
•
A WR-A10 adapter is required when using the WR-R10.
•
Be sure the firmware for the WR-R10 has been updated to the latest
version (version 3.0 or later). For information on firmware updates, see
the Nikon website for your area.
HDMI
G
button
U
B
setup menu
Location Data (Built-In)
G
button
U
B
setup menu
Wireless Remote (WR) Options
G
button
U
B
setup menu
To Next Page
Loading...
