46
Readying the Camera
9
Exit the menus.
Lightly press the shutter-release
button halfway to exit to shooting
mode.
D
The Clock Battery
The camera clock is powered by a separate, non-rechargeable CR1616
lithium battery with a life of about two years. When this battery is low, a
B
icon will be displayed in the top control panel while the standby
timer is on, indicating that it is time to purchase a replacement. For
information on replacing the clock battery, see “Replacing the Clock
Battery” (
0
1083).
A
Setting the Clock via GNSS
To record your location and the current UTC (Universal Coordinated
Time), select [On] for [Location data (built-in)] > [Record location data].
To set the camera clock to the time supplied by the built-in GNSS receiver,
select [Yes] for [Location data (built-in)] > [Set clock from satellite].
A
SnapBridge
Use the SnapBridge app to synchronize the camera clock
with the clock on a smartphone or tablet (smart device). See
SnapBridge online help for details.
To Next Page
Loading...
