- D 0 ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
・
Remove the rubber SW (#382), and two buttons (#5381,#6384).
・
Take out the two screws (#605), and remove [#348], [#347] and the release button unit (#B5350).
・
Take out the screw (#650), and release the wire from the boss.
Release button unit / buttons / other small parts
#650
Wire
#B5350
#6384
#5381
#382
#347
#348
#605×2