Nikon D60 - Eye Sensor Inspection and Adjustment

- Ａ 39 ･ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
Eye sensor inspection and adjustment
Caution:
When this adjustment software is used for the rst time, prepare three units of D60, and get the reference values
of the eye sensor for the main menu.
Move the camera closer to the standard reector. Measure the distance where TFT monitor blacks out and input
the average value of the three cameras.
Move the camera away from the standard reector. Measure the distance where TFT monitor lights up and input
the average value of the three cameras.
D60
Standard reector (10cm×10cm)
※
Input the value into the screen for getting reference values of the eye sensor.
△ (Addition)
Reference line (Eye-sensor) face
△ (Addition)
Only (J18360) is available.
Changed page △× 2
Ｍ
サービス
計画課
Mar.19.2008
INC