- Ａ ･ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
D60 Inspection and Adjustment Software (J18443)
This inspection and adjustment software runs on Windows.
Install the software by following the below procedure.
<Operating environment>
Check the following operating environment which is required for installing this program on PC.
PC IBM PC/AT compatible
OS Windows XP Professional Edition, Windows XP Home Edition,
Windows2000,
CPU Pentium II 300MHz ～
RAM (memory) 256 MB or more
HD 6MB-or-more free disk space is required when installing
Monitor resolution 1024 × 768 pixels or more
Interface
※ USB interface (V1.1, 2.0)
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
＜ Cautions in starting program ＞
When starting this program, close all the other applications.
If some other applications are running, this program may not be activated.
＜ Procedure for installation ＞
Because this is the self-extracting le, decompress the le before installing, and follow the next procedure.
1.Execute the up-to-date “SetFolder.EXE”. The folder will be created automatically as shown in
“C:\DeskTopLauncher\D-SLR\D60”.
To Next Page
Loading...
