- A ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
#638×2
#290
#291
#604
#285
#B2008
#B261
#B2008
#607 #293
・
Mount the eyepiece barrel unit (#B261), and x it with two screws (#638).
・
Put the AE sensor adjusting-spring [#290] and AE FPC unit [#B2008]. Turn the screw (#291)
all the way
lightly to the end, then give each two-and-half turns counterclockwise.
・
Put the AE sensor plate-spring (#285), and x it with the screw (#604).
・
Connect the FPC of the AE FPC unit (#B2008) to the connector.
・
Put the AE FPC retainer plate (#293), and x it with the screw (#607).
Eyepiece barrel unit
AE FPC unit
Adhesive: Screwlock