- Ａ ･ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
a:
#741
b:
#291-1
Standard →
Reference screw
X-direction
→
a: Screw
Y-direction
→
b: Screw
Y-direction (b)
tightening
Y-direction (b) loosening
Ｘ
-direction (a)
tightening
Ｘ
-direction (a)
loosening
(#B2008) Metering FPC unit Metering FPC unitMetering FPC unit
Adhesive: Screwlock
⑫
After completing the adjustment, remove the temporarily-assembled rear cover and front cover. Then mount
the rubber eyepiece (#B271) and x the top cover with two screws (#5737) and two screws (#635).
Discharge of Main condenser
Main
condenser
2KΩ/5W
・
Discharge currents from both terminals of the main condenser.
To Next Page
Loading...
