VBA21001-R.3753.A
- R6
･
-
logo_Q0650_forGraphic
071004_Gdesign_ito
Item Judgment standard Remark
Dust in shot image Judgment method
Compensate exposure so that the center of "425×425 pixel" image
becomes +1 EV (180 ±30 LSB), compared to correct exposure.
Judge based on dust contrast, size, quantity, and distance btwn dusts, of
the whole screen.
Standard
Quantity: 10 dusts or less
Size and Maximum contrast
・Point defect
19 pixels or less & 11% or less
21 pixels or less & 9% or less
29 pixels or less & 7.5% or less
・Pixel defect
6 pixels or less & 11% or less
Distance between dust centers (centroids): 200 pixel or more
AF105mm/F2.8D
F16
AE: M mode
Shoot object with 5100K5100K
viewer
Color setting: Mode IIIa
Image quality: JPEG
FINE
Image size: L
WB: Preset
ISO100
Backlight life 3000 hours or more (when 20mA is applied）
TFT unit
Pixel defects
Luminescent pixels:
3 or less (In "A" zone, G=0, Other than G ≦ 1）
2 defective pixels must not be in a row.
Black pixels:
3 or less (1 or less in "A" zone.）
2 defective pixels must not be in a row.
Total luminescent/black pixels:
Total: 3 or less (1 or less in "A" zone.）
Black pixels must be separated by 5 mm or more.
In case the tthe above standard is not met, replace TFT monitor.
※ A : 19.08 × 25.44mm
A': 38.16 × 50.88mm (excluding "A"）
(The size in height and width is measured by aligning
the center of the monitor.)
Ａ
Ａ '
To Next Page
Loading...
