Nikon ECLIPSE MA200 - Network Connection; Unit System Capable of Establishing Network

Chapter 4 Assembly
73
4.3 Network Connection
4.3.1 Unit system capable of establishing network
The table below shows a unit system capable of establishing network on a PC or the DS-L2 connected to
MA200 via the USB cable.
[Note 1] When the DS-L2 is connected, the MA200 cannot be controlled.
[Note 2] For use with LV-NU5A motorized nosepiece.
MA2-DP supporting
pillar for dia-Illuminato
r
100W
D-LH/LC Lamphouse
Power cord
Power
cord
Power cord
Power cord
PC
DS-L2
A
C adapte
r
AC adapter
Power cord
Intermediate
magnification unit
MA200
main body
Nosepiece
Controller 2
[Note 2]
RS232C cross cable
Signal cable
USB cable
Fiber
adapter
HG fiber
C-HGFI
HG Precentered Fiber Illuminator
C-HGFIE
HG Precentered Fiber Illuminator
LV-LH50PC Lamphouse
Power supply
A
C adapter/power cord
exclusive for your PC
RS232C cross cable
Power
cord
Power cord
A
C adapte
r
DS-U2/DS-L2
[Note 1]
Camera cable
USB
cable
Camera cable