Nikon ECLIPSE MA200 - Viewing User Control Options and Status Displays on a PC or the DS-L2

Chapter 4 Assembly
74
4.3.2 Viewing user control options and status displays on a PC or the DS-L2
The table below shows user control options and status displays of a unit that can be controlled on a PC or the
DS-L2 connected to MA200 via the USB cable.
The “/” indicates external control/status display is unavailable.
To control MA200 on a PC or to display the current status of the MA200 on a PC, use the “SDK” in the
supplied “MA200 Setup Tool” software. For details on how to install the “SDK” on a PC, refer to the
software manual supplied with the “MA200 Setup Tool.”