Chapter 4 Assembly
96
4.17 Eyelevel Risers
1 Fully loosen the eyepiece tube clamp screw on the
microscope, to mount the eyelevel riser onto the
attaching part for the eyepiece tube, then fitting
the dovetail on the eyelevel riser to the circular
groove of the attaching part.
2 Secure the eyelevel riser by tightening the
eyepiece tube clamp screw.
3 Attach the eyepiece tube on the eyelevel riser and
secure the eyepiece tube with clamp screw.
Eyepiece tube
clamp screw
Eyepiece tube
clamp screw
To Next Page
Loading...
