Chapter 2 Microscopy
16
2.1 Bright-field Microscopy under the Episcopic Illumination
Turn on the power to light up the episcopic illumination lamp.
1 Turn on the power switch. (See 3.1.1.)
The power LED on the front is lit.
2 Be sure that the Internal/External brightness
control changeover switch is set to OFF “internal
mode.” (See 3.2.2.)
3 Turn the brightness control dial to light up the
lamp. (See 3.2.1.)
1-1
1-1 1-2
1-3
To Next Page
Loading...
