Chapter 3 Operation Details
64
3.24 Using the Supporting Arm (MA2-MP)
The supporting arm is designed to mount Nikon camera control unit DS-L2.
The Supporting Arm for DS-L2 is equipped with a one-touch release. If you pull up the mount arm
attaching/detaching knob, the DS-L2 can be attached or removed from the supporting arm.
DS-L2 attached to the supporting arm
Figure 3.24-1 Supporting arm
The rotation torque can be adjusted depending on the
tightness of the docking section of the mount arm to
keep the DS-L2 steady, while achieving more
comfortable operation for angle adjustment. Turn the
two nuts on the docking sections with the supplied
tool and control each rotation torque for the
horizontal/vertical direction.
For using the DS-L2, refer to the instruction manual
supplied with the DS-L2.
Mount arm
attaching/detaching knob
Mount arm
Rotation
torque
nuts (x2)
Supporting
arm
DS-L2
To Next Page
Loading...
