37
6
Confirm that the ready-light comes on, then shoot.
●
●
●
Setting the flash output level
The flash output level changes every time you press the
j
or
i
button, as
shown below.
When you press the
j
button:
When you press the
i
button:
• The numbers in parentheses represent the adjustable flash output level in 1/3 step
except between 1/1 and 1/2. Therefore, 1/2 (-0.7) and 1/4 (+0.3) represent the same
flash output level.
•To extend the flash shooting distance, choose a flash output level close to M1/1.
• The value can be quickly changed by continuously pressing the
i
or
j
button.
• The decimal place blinks during adjustment.
=
The same flash
output level
To Next Page
Loading...
