Nilfisk-Advance SC3000 Service Manual

Driving Wheel System 128Service Manual – SC3000
Driver's Seat Safety Microswitch Replacement
Disassembly
1. Drivethemachineonaleveloor.
2. Turn the ignition key to “0” and disconnect the batteries.
3. Lift the recovery tank assembly and remove the driver's seat mounting screws.
4. Disconnect the microswitch connector.
5. Lift the recovery tank cover and remove the remaining driver's seat mounting screws.
6. Remove the driver's seat, remove the wiring harness from the hole and then remove the driver's seat
microswitch by peeling off the adhesive.
Assembly
7. Assemble the components in the reverse order of disassembly.
8. Check that the machine cannot be stared when the operator is not on the driver's seat.

Nilfisk-Advance SC3000 Specifications

General

Brand	Nilfisk-Advance
Model	SC3000
Category	Scrubber
Language	English