General Information 10Service Manual – SC6500
™
Parts and Service
Repairs should be performed by an Authorized Nilsk-Advance Service Center, which employs factory-
trained service personnel and maintains an inventory of Nilsk-Advance original replacement parts and
accessories.
Nameplate
The Model Number and Serial Number of your machine
are shown on the machine nameplate. This information is
needed for selecting the correct technical documentation
and when ordering repair parts for the machine.
“Part No” on the label is equivalent to the machine
“Model Number”
Note that the Nameplate is attached to the rear of the
steering column.
Transporting the Machine
Caution! Before transporting the machine on an open truck or trailer, make sure that:
• The machine is tied down securely using approved tie down points.
• All access doors and covers are secured (tape or remove as needed).
• The battery/batteries are disconnected.
• Excessive strap force on rotomold plastic parts will cause permanent damage.
Nameplate
To Next Page
Loading...
Need help?
General
