To Next Page

To Previous Page

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 32

Mandatory Program Options

These opons must be set to correctly match the Main Machine Controller to the machine.

DECK TYPE – There are 5 possible scrub deck opons. This funcon congures the control unit current sengs, ow rate

sengs, and scrub pressure sengs for each of the scrub deck types.

• 28 INCH / 71 cm CYL

• 32 INCH / 81 cm CYL

• 26 INCH / 66 cm DISC

• 28 INCH / 71 cm DISC

• 34 INCH / 86 cm DISC

To change the seng:

1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.

2. To save and go back to the main menu, press the scrub ON/OFF switch.

MACHINE PLATFORM – This funcon congures the control unit for the machine size. Select between 21-gallon medium-

plaorm machine (SC750, SC750 ST) or 25-gallon large-plaorm machine (SC800, SC800 ST). This seng will aect the

soluon level, soluon, and chemical ow rate calculaons in the rmware.

• SC750 (21 GAL / 80 LTR)

• SC800 (25 GAL / 95 LTR

To change the seng:

1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.

2. To save and go back to the main menu, press the scrub ON/OFF switch.

CHEMICAL SELECTION – This funcon is used to let the controller know whether or not the machine is equipped with the

oponal Detergent (Chemical) Mixing system and what brand to display upon power up. If it is equipped, it also needs to

know what geographic locaon the machine is used in for displaying the detergent rao as expected in that region. North

America mode: Shows chemical rao using X: XXX notaon (example 1: 300) and the “Advance” brand upon power

up for the “Americas market” (North, South and Central America). Global mode: (Outside of North, South and Central

America) Shows chemical rao using percentage notaon (example 0.3%) and the “Nilsk-Advance” brand upon power

up. In o mode, the chemical icon and rao are not displayed on the LCD.

• NO ONBOARD CHEMICAL

• N.AMERICA CHEM MODE

• GLOBAL CHEM MODE

To change the seng:

1. Scroll through the menu using the Soluon Increase and Decrease switches unl you get to the desired value.

2. To save and go back to the main menu, press the scrub ON/OFF switch.

Nilfisk-Advance SC800 Service Manual

Other manuals for Nilfisk-Advance SC800