Nilfisk-Advance SC800 Service Manual

Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 38
Main Machine Controller SC750 and SC800 Models (Control Panel with membrane switches)
Note: Electronic devices like the Main Machine Controller are sensive to Electrostac Discharge (ESD). Before handling
the controller, touch a metal bench or shelf to discharge any electrical charge that may have built up in your body. Do not
walk around with a controller in your hands.
1. Completely drain soluon tank. This is important for the soluon level sensor to work properly upon reassembly.
2. Turn o key.
3. Disconnect Handle electrical connector. Remove top two handle bolts and loosen the lower two. Rotate Handle
Assembly down.
4. Remove circuit breaker mounng plate screws. Parally remove plate. Remove breakers from plate, then turn
plate and insert into cover opening.

Nilfisk-Advance SC800 Specifications

General

Brand	Nilfisk-Advance
Model	SC800
Category	Scrubber
Language	English