Nilfisk-Advance SW4000 Service Manual

Engine System - LPG 123Service Manual – SW4000
LPG System Hose and Fitting Disassembly/Assembly (Continues)
• The ttings (D) are equipped with inner gaskets.
• The ttings (E) are provided with sealant.
Caution! Ifthettings(E)areturnedveryslightly,theirtightnesscanbecompromised
(becausethesealant“brakes”),thusthosettingshastobeunscrewedandscrewed
again after having applied new sealant, as shown below.
• The ttings (F) are equipped with fastening bands.
Assembly
8. Before tightening the ttings (D) clean them accurately and replace the inner gaskets.
9. Before screwing down the ttings (E) carefully remove any remaining of sealant, then apply the new
sealant; use PTFE by WURTH saBesto, P/N 0893 511 050 – S/I (or equivalent). Proceed according to the
instructions on the package of the product.
10. Before tightening the ttings (F) clean them accurately and replace the fastening bands.
11. After assembling the ttings (E) wait the time necessary for the sealant to harden, before the LPG gas
enters the system.
C
D
D
D
D
D
D
D
E
E
E
E
E
E
E
E
E
E
F
F
B
E
E
E
A
E
P200147

Nilfisk-Advance SW4000 Specifications

General

Brand	Nilfisk-Advance
Model	SW4000
Category	Floor Machine
Language	English