General Information
23
Service Manual – SW4000
Technical Data (Continues)
Caution! If the machine is to be used at ambient temperatures below +10°C, the oil should be
changed with equivalent oil having a viscosity of 32 cSt. For temperatures below 0°C,
use an oil with lower viscosity.
Hydraulic oil technical data
AGIP ARNICA 46 32
Viscosity at 104 °F (40 °C) in
2
/s (mm
2
/s) 0.07 (45) 0.05 (32)
Viscosity at 212 °F (100 °C) in
2
/s (mm
2
/s) 0.012 (7.97) 0.009 (6.40)
Viscosity index / 150 157
Flash point COC °F (°C) 419 (215) 396 (202)
Pour point °F (°C) -32.8 (-36) -32.8 (-36)
Density at 15 °C (59 °F) lb/gal (kg/l) 1.9 (0.87) 1.9 (0.865)
To Next Page
Loading...
Need help?
General
