Nilfisk-ALTO SCRUBTEC R 466 Service Manual

General Information
6
Service Manual – SCRUBTEC R466 ... FOCUS II Micro Rider
Conventions
Forward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to
say in driving position.
Service and Spare Parts
Service and repairs must be performed only by authorised personnel or Nilsk Service Centers. The authorised
personnel is trained directly at the manufacturer's premises and has original spare parts and accessories.
Contact Nilsk Retailer indicated below for service or to order spare parts and accessories, specifying the ma-
chine model and serial number.
(Apply Retailer label here)
Serial Number Decal
The machine model and serial number are marked
on the plate (see the example to the side).
Product code and year of production are marked on
the same plate.
This information is useful when requiring machine
spare parts. Use the following table to write down
the machine identication data.
Battery 24 Vdc
Date code: .......
LpA = 65 dB(A)
Charg.100-240Vac 50-60 Hz
Model:
Scrubber-Dryer FOCUS II M. Rider 26D
Prod. Nr: 9087278020
GVW: 459 kg/1012 lb
63 A
Serial No: ..................
IPX4
Type E Floor cleaning machine
2%
“Made in Hungary”
14600 21st Ave N
Plymouth, MN, USA
www.clarkeus.com
UL STD 583
CSA STD C22.2 N.68-92
3084826
Control Nr:
A Nilfisk-Advance Brand
P100674
MACHINE model .............................................................................................
PRODUCT code ..............................................................................................
MACHINE serial number .................................................................................

Nilfisk-ALTO SCRUBTEC R 466 Specifications

General

Brand	Nilfisk-ALTO
Model	SCRUBTEC R 466
Category	Scrubber
Language	English