Nixeus NX-EDG34S User Manual

30
Picture Quality Setting – Noise Reduction
a) In the PICTURE QUALITY SETTING submenu, use the buttons ∇ and ∆ to highlight NOISE REDUCTION
and press [1] to confirm selection.
b) Use the buttons ∇ or ∆ to adjust the response time setting to either Off, High, Middle, or Low.
c) Once you adjust the NOISE REDUCTION settings to your desired level, press [1] once to confirm and exit to the
PICTURE QUALITY SETTING sub-menu.
d) Press [2] once to exit out of PICTURE QUALITY SETTING sub-menu and again to close the OSD menu.
NOTE: We recommend leaving this setting on OFF.

Nixeus NX-EDG34S Specifications

General

Brand	Nixeus
Model	NX-EDG34S
Category	Monitor
Language	English