Nixeus NX-EDG34S User Manual

32
Display – Aspect Ratio
a) To adjust the Aspect Ratio of the monitor, in the DISPLAY submenu, use the buttons ∇ and ∆ to highlight
Aspect Ratio and press [1] to confirm selection.
b) Use the buttons ∇ or ∆ to adjust the Aspect Ratio setting to either Wide Screen, 4:3, 1:1 or Auto. The default
setting is Wide Screen.
c) Once you adjust the Aspect Ratio settings to your desired setting, press [1] once to confirm and exit to the
DISPLAY sub-menu.
d) Press [2] once to exit out of DISPLAY sub-menu and again to close the OSD menu.
NOTE: Other monitor settings enabled may prevent the Aspect Ratio setting from being accessed. For example if
FreeSync is ON, you will not be able to change the Aspect Ratio as the option will be grayed out.

Nixeus NX-EDG34S Specifications

General

Brand	Nixeus
Model	NX-EDG34S
Category	Monitor
Language	English