Nixeus NX-EDG34S User Manual

39
OSD – OSD V-Position
The OSD V-Position setting allows you to move and position the OSD Menu vertically in the monitor.
a) In the OSD sub-menu, use the buttons ∇ or ∆ to highlight OSD V-Position and press [1] to confirm
selection.
b) Press ∇ or ∆ to adjust the OSD V-Position to your desired setting.
c) Once you finish adjusting OSD V-Position settings to your desired setting, press [1] once to confirm and exit
to the OSD sub-menu.
d) Press [2] once to exit out of OSD sub-menu and again to close the OSD menu.

Nixeus NX-EDG34S Specifications

General

Brand	Nixeus
Model	NX-EDG34S
Category	Monitor
Language	English