33 50_Afficheur_Multigraphic_um_UK_27
2.7.1.1 Backlighting
The backlightighing can toggle automatically between Night and Day settings, driven
by a light sensor, or can be manually set. Backlight settings can be adjusted as
required for each Multigraphic independently.
Backlight setup process:
Auto: Backlighting toggles automatically between Night and Day settings, driven by a
light sensor. The Backlight intensity and the Skin are those set for each Mode.
Day: Backlighting is on with the light intensity and the Skin set for Day Mode.
Night: Backlighting is on with the light intensity and the Skin set for Night Mode.
Whatever page is currently displayed press and hold « OK » for 3
seconds to access directly to the backlight levels settings.
There are 20 levels of Backlighting.
To Next Page
Loading...