Basic functions
Copyright © 2004 Nokia. All rights reserved
19
• To move the cursor left or
right, press or ,
respectively.
• To delete the character to
the left of the cursor, press
. To clear the display,
press and hold this key.
■ Speed dialling
Speed dialling is an easy way to
call a phone number that has been
assigned to a number key (2 to 9).
Assigning a phone number to a
number key
Press (Menu) twice in
standby mode. Scroll to Speed
dials and press (Select).
Scroll to the desired key and press
(Assign). Scroll to the desired
name or phone number and press
(Select).
Speed dialling a phone number
• Either: In standby mode, press a
number key and then
(Call).
• Or: If you have set on the Speed
dialling function (see Call
settings (Menu 6-1) on page
30), press and hold a number
key in standby mode.
■ Locking the keypad
The keypad lock prevents the keys
from being accidentally pressed.
To turn the lock on or off: In
standby mode, press (Menu)
and then press the Space key
quickly.
When the keypad is locked:
• The indicator is shown.
• You can answer, end, or reject a
call in the normal way. During a
call, you can operate the phone
as usual.
• The HDD-2 headset can be used
as usual.
• You can listen to the radio or
the music player.
• The keys located on the side for
Radio, Music player, Volume up,
Volume down are also locked.
Note: When the keypad is
locked, calls may be
possible to the emergency
number programmed into
your phone (e.g. 112 or
other official emergency
number). Type in the
emergency number and
press (Call). The
number is displayed only
after you have keyed in its
last digit.
Maverik_apac.fm Page 19 Thursday, October 7, 2004 2:03 PM
To Next Page
Loading...
Need help?
General
