Menu functions
46
Copyright © 2004 Nokia. All rights reserved
See Making a connection to a
WAP service on page 48.
4. Start browsing the pages of the
WAP service. See Browsing the
pages of a WAP service on page
49.
5. Once you are done with
browsing, end the connection
to the WAP service. See Ending
a WAP connection on page 50.
Setting up the phone for a
WAP service
You may obtain the connection
settings as a text message from
the network operator or service
provider offering the WAP service
that you want to use. For more
information, contact your network
operator or service provider.
If this is not the case, you can type
in the settings manually. For
appropriate settings, contact your
network operator or service
provider. The WAP settings may be
available, for example, on the web
site of the network operator or
service provider.
Saving the settings received
as a text message
When you receive the connection
settings as a text message, Service
settings received is displayed.
• To save the received settings:
Press (Options), scroll to
Save, and press (Select).
• If you want to view the settings
before saving them: Press
(Options), scroll to View, and
press (Select).
Press (Save) to save the
settings or to return to the
Options list.
Typing in the connection
settings manually
For appropriate settings, contact
your network operator or service
provider.
1. In the Services menu, scroll to
Settings and press
(Select).
2. Press (Select) when
Connection settings is
displayed.
3. Scroll to a set of connection
settings and press
(Options).
A set is a collection of settings
needed for making a
connection to a WAP service.
4. Scroll to Edit and press
(Select).
5. Scroll to each of the settings
below and press (Select).
Make all the required settings
one by one.
Maverik_apac.fm Page 46 Thursday, October 7, 2004 2:03 PM
To Next Page
Loading...
