Nokia 5510 - Page 47

Menu functions
Copyright © 2004 Nokia. All rights reserved 47
• Homepage: Type in the
homepage address of the
WAP service that you want
to use and press (OK).
• Connection type: Scroll to
Continuous or Temporary,
and press (Select).
• Connection security: Scroll
to On or Off, and press
(Select).
When connection security is
on, the phone tries to use a
secure connection with the
WAP service. If a secure
connection is not available,
the connection will not be
made. If you wish to
connect anyway, with a
non-secure connection, set
the connection security to
Off.
• Bearer (a connection
method): Scroll to USSD or
Data, and press
(Select). For pricing, the
connection speed, and other
information, contact your
network operator or service
provider.
• Service code (shown if the
bearer is USSD): Type in the
code and press (OK).
• Service number (shown if
the USSD address type is
Service number): Type in the
service number and press
(OK).
• Dial-up number (shown if
the bearer is Data): Type in
the number and press
(OK).
• IP address (shown if the
bearer is Data): Type in the
address and press
(OK).
• Authentication type
(shown if the bearer is
Data): Scroll to Secure or
Normal, and press
(Select).
• Data call type (shown if the
bearer is Data): Scroll to
Analogue or ISDN, and
press (Select).
• User name (shown if the
bearer is Data): Type in the
user name and press
(OK).
• Password (shown if the
bearer is Data): Type in the
password and press
(OK).
6. After you have made all the
required settings, you can
change the name of the setting
set. Press and then
(Options), scroll to Rename,
and press (Select). Type in
the name and press (OK).
Maverik_apac.fm Page 47 Thursday, October 7, 2004 2:03 PM