Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B)
Issue: 01 3FE-47429-AAAA-TCZZA 89
Table 29 Mesh parameters
Field Description
Beacon Serial
Number
Serial number of the Beacon 6 (HA-0336G-A)
Enable Bridge Mode Select this checkbox to enable bridge mode; see Figure 35.
Onboarding Status Indicates whether or not the Beacon 6 (HA-0336G-A) associated with the serial
number is onboarded to the mesh
Backhaul Status Indicates the status of the backhaul connection
Friendly Name Indicates a name determined by the user for the Beacon 6 (HA-0336G-A) associated
with the serial number
2 If required, select the Enable Bridge Mode checkbox. See Figure 35.
Figure 35 Mesh window—Enable Bridge Mode
3 Click REBOOT in the confirmation dialog box. Ensure that you have connected the WAN port of your Nokia Wi-Fi
device to the LAN port of your existing router; see Figure 36. You will lose network connectivity for a short period
of time.
To Next Page
Loading...
