Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
88 3FE-47429-AAAA-TCZZA Issue: 01
Source Port and
Source Port Max
Enter the values for the source port and port max (highest port number) or select the
Exclude checkbox
Destination Port and
Destination Port Max
Enter the values for the destination port and port max (highest port number), or select
the Exclude checkbox
Procedure 24 Mesh
This procedure describes how to add a Beacon 6 (HA-0336G-A) to the mesh table.
1 Select Network > Mesh from the top-level menu in the Ethernet Gateway window.
Figure 34 shows the window for configuring the mesh.
Figure 34 Mesh window
Table 29 describes the fields in the Mesh window.
2
Choose a QoS type from the drop-down menu: L2 or L3.
3
Configure a QoS policy.
4
Click Add to add a QoS policy.
5
STOP. This procedure is complete.
To Next Page
Loading...
