Nokia PremiCell - User Manual

Nokia PremiCell Data
List of AT Commands
NOKIA is a registered trademark of Nokia Corporation, Finland.
©2000 Nokia Mobile Phones. All rights reserved.
Nokia Mobile Phones operates a policy of continuous improvement.
Therefore we reserve the right to make changes and improvements
to any of the products described in this guide without prior notice.
Nokia Mobile Phones is not responsible for any loss of data, income
or any consequential damage howsoever caused.
9351671
Issue 4

Nokia PremiCell Specifications

General

Display	Monochrome graphic
Network	GSM
Main Camera	No
Front Camera	No
Battery	NiMH

Summary

Introduction to AT Commands

AT Command Syntax Guide

Explains the general structure and syntax rules for AT commands.

AT+ Command Syntax Details

Details the specific syntax for AT+ commands, including setting and querying values.

Accessing AT Command Help

Describes how to use AT? and AT?0 for general command help.

Core AT Command Categories

Call Control AT Commands

Commands for initiating, answering, and managing calls.

Data Adapter Control Commands

Manages data adapter settings, identification, and profiles.

Terminal Control Commands

Commands for terminal error reporting and status.

Network Communication Commands

Commands for network service selection and parameters.

Messaging and Configuration AT Commands

SMS Commands (Text and PDU Modes)

Handles SMS message sending, reading, and storage in different modes.

S-Register Configuration

Details S-registers for storing AT command configurable parameters.

AT Command Responses and Utilities

Special AT Command Responses

Explains specific result codes and error messages from the data adapter.

AT Command Error Codes Explained

Covers CME ERROR codes for terminal errors and CMS ERROR codes for messaging failures.

AT Command Abbreviations

Glossary of common abbreviations used in AT commands and documentation.