Nokia PremiCell - AT+CPMS Preferred Message Storage

40 ã2000 Nokia Mobile Phones. All Rights Reserved.
Parameters:
<mt> mobile terminated messages supported (value 1) or not
(value
0)
<mo> mobile originated messages supported (value 1) or not
(value
0)
<bm> broadcast type messages supported (value 1) or not (val-
ue 0)
AT+CPMS Preferred Message Storage
This command selects memory storages to be used for reading/de-
leting (m1), writing/sending (m2), and receiving (m3) short messag-
es. Amount of used and available message locations in each memory
is returned as re-
sponse.
Syntax:
AT+CPMS=[<m1>[,<m2>[,<m3>]]] Select preferred storage.
Response is +CPMS: <used1>,
<total1>, <used2>, <total2>,
<used3>, <total3>.
AT+CPMS? Current setting query.
Response is +CPMS: <m1>,
<used1>,
<total1>, <m2>, <used2>,
<total2>,
<m3>, <used3>, <total3>.
AT+CPMS=? Show supported values.
Response is +CPMS: (list of
support-
ed <m1>s), (list of supported
<m2>s), (list of supported
<m3>s).
Parameters: