Nokia PremiCell - Aten Command Echo; Athn Hang-Up; ATO Go On-Line; ATS Select an S-Register

8 ã2000 Nokia Mobile Phones. All Rights Reserved.
ATEn Command Echo (Page 20)
Determines whether or not characters are echoed in the command
mode.
n = 0 / n not present echoing disabled
n = 1 echoing enabled
ATHn Hang-Up (Page 9)
Hangs up the call.
n = 0 / n not present clears the call
ATO Go On-Line (Page 9)
Returns data adapter to on-line mode, after a connection has been
established and the escape sequence (+++) has been issued.
ATS Select an S-Register (Page 11)
ATSr? Displays the value of S-register r.
ATSr=n Sets the value of S-register r.
ATV Define Response Format (Page 20)
Determines whether result codes are transmitted in numeric or
alphanumeric form.
ATV[0] Numeric responses (short form)
ATV1 Textual responses (long form)
AT&F Restore Factory Settings (Page 12)
Restores all factory settings including S-register settings but does
not save them.
AT&V View Active Configuration (Page 12)
Displays the current S-register settings.