Nokia PremiCell - AT+CMGL List Messages

ã2000 Nokia Mobile Phones. All Rights Reserved. 47
1 data adapter buffer of indications is cleared
when
<mode> 1 or 2 is entered
AT+CMGL List Messages
This command returns messages with a status value <stat> from a
preferred message storage selected with the AT+CPMS command.
This command form applies only to the SMS text mode, and the PDU
mode form of the command is described in the next sec-
tion. Syntax:
AT+CMGL[=<stat>] List messages.
Response is +CMGL: <index>,<stat>, <addr>,,
[<scts>][,<type>, <length>]<CR><LF><data>
and it
is repeated several times if more than one short
message is listed.
AT+CMGL=? Show valid values.
Response is +CMGL: (list of supported <stat>s).
Parameters:
<stat>
“REC UNREAD” received unread messages (default)
“REC READ” received read messages
“STO UNSENT” stored unsent messages
“STO SENT” stored sent messages
“ALL” all messages
<index> location number
<addr> origin or destination address
<scts> service centre time stamp
<type> type of origin or destination address, 129 for
normal