54 ã2000 Nokia Mobile Phones. All Rights Reserved.
Data Unit in hexadecimal format
<mr> message reference number
AT+CMGW Write Message to Memory
This command stores a message in a preferred memory storage se-
lected with the AT+CPMS command. The memory location <index>
of the stored message is returned. By default, the message status
will be set to "stored unsent ", but the parameter <stat> also allows
other status values to be given. Entering of text is done similarly as
specified in the command AT+CM-
GS. Syn-
tax:
AT+CMGW=<length>[,<stat>]<CR><pdu><ctrl-Z/ESC>
Store message.
Response is +CMGW:<index>.
Parameters:
<length> length of the actual PDU in octets
<stat>
0 received unread message
1 received read message
2 stored unsent message
3 stored sent message
<pdu> GSM 03.40 Protocol
Data Unit in hexadecimal format
<index> location number
To Next Page
Loading...
