Nokia PremiCell - AT+CSAS Save Settings; AT+CRES Restore Settings

44 ã2000 Nokia Mobile Phones. All Rights Reserved.
0 message types specified in <mids> and <dcss>
are
accepted
1 message types specified in <mids> and <dcss>
are
not accepted
<mids>: all different possible combinations of message
identifiers, example: "0,1,5,10-20,22"
<dcss>: all different possible combinations of data cod-
ing
schemes, example: "0-3,5"
AT+CSAS Save Settings
This command saves active message service settings to a non-vola-
tile memory. Saved values are not automatically restored after ter-
minal
power up. Syn-
tax:
AT+CSAS[=<profile>] Save settings.
AT+CSAS=? Show valid values.
Response is +CSAS: (list of supported <profile>s).
Values for <profile>:
1 settings are stored to terminal memory
AT+CRES Restore Settings
This command restores message service settings from a non-volatile
memo-
ry. Syn-
tax:
AT+CRES[=<profile>] Restore settings.
AT+CRES=? Show valid values.