Nokia RM-70 - Deactivating FPS-8

5. To activate the prommer, select the activation file and click Open.
Figure 31 Box activation
6. To complete the activation, restart FPS-8.
Deactivating FPS-8
Context
If there is, for example, a need to send the FPS-8 box for repair, it must be deactivated first.
Steps
1. Start Phoenix service software.
2. Choose Flashing→Prommer Maintenance .
3. In the
Prommer Maintenance window, click Deactivate.
4. To confirm the deactivation, click Yes.
Figure 32 Deactivation warning
The box is deactivated.
5. To complete the deactivation, restart FPS-8.
RM-70
Nokia Customer Care Service Software Instructions
Page 3 –26 COMPANY CONFIDENTIAL Issue 1
Copyright © 2005 Nokia. All rights reserved.